New-holland T7.235 User Manual download pdf (Page 21)

AUTO PTO OPERATION

Auto PTO can be selected to

automatically disengage the PTO

as the rear linkage is raised above

a pre-set position. This protects the

PTO shaft and tractor. The system

will also reengage drive as the

linkage is lowered.

DIRECT DRIVE FOR FUEL EFFICIENCY

All T7 tractors are fitted with a direct drive PTO to minimise power loss

between engine and implement. The PTO is engaged via a push-pull

control, with advanced Soft Start management. This modulates

engagement of high intertia attachments to protect the driveline.

Speed selection is via mechanical levers; SideWinder II T7.220 and

above feature electronic speed selection. Four speeds: 540, 540E,

1000 and 1000E are available.

STRONG, EFFICIENT AND POWERFUL

The maximum lift capacity on T7.170 to T7.210

tractors is 8,275kg, climbing to a massive 10,463kg

on the T7.220 and above. The rear linkage and

hydraulics are designed to work with heavy mounted

equipment over extended periods. The system also

incorporates integral dynamic ride control shock

load protection. This will reduce bounce when

travelling with a heavy linkage load at transport

speeds. Fender mounted controls for the rear

linkage, a rear remote and the PTO are available.

NH_T7_Brochure.qxd:NH_T7_Brochure 23/5/11 5:26 PM Page 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

New-holland T7.235 User Manual Page 21